Rod is made of flexible, white nylon with male and female ends. Designed to negotiate 90 degree joints in most pellet stove flues and vents. Removes hard ash and deposits build-up. Can be cleaned without disassembly.

This rod's quality construction utilizes an open single spiral design, with plated shafts and threading on the end for easy coupling with fiberglass rods or pull rings. Regular maintenance of flues and stovepipes helps your stove to burn more efficiently and be safer to operate. It is recommended that you clean your chimney every few weeks. 

This sturdy, spring wire brush is designed with the homeowner in mind. It has an open, single spiral construction, plated shafts, and threading for easy coupling with fiberglass rods or pull rings (sold separately). Scrubbing your flue and stovepipe regularly with the wire chimney cleaning brush helps your stove to burn more efficiently and safely.

This 5 pc. fiberglass chimney rod kit is the perfect tool for hard-to-reach areas of the chimney. Every rod is 4 ft. long, rods connect, measuring 18 ft. in total. Make your next chimney cleaning a snap and help your stove burn more efficiently and safely.

Covers excess area around flue opening and provides a finished appearance where the flue pipe connects to the masonry chimney breech. Manufactured from 24 gauge, black matte, pre-painted scratch and chip-resistant steel.

Also available: 7 inch 24 gauge collar #104043, 8 inch 24 gauge collar #104042

Use with wood or coal stove to regulate air by twisting handle to open and close damper. Install in flue pipe. Improves stove efficiency. Size: 6 Material: Cast iron.

Also available: 3" damper #104104, 4" damper #104103, 5" damper #104101, 7" damper #104100, 8" damper #104099.

Pull Ring allows you to attach your brush to a rope. Can be pulled through your chimney for cleaning.

Use with rear outlet stoves. Used to direct the exhaust upward. Features an exclusive harder, more scratch-resistant paint. Pipe smokes less at start-up due to higher-temperature-rated paint finish. Application: Single wall black pipe.

Also available: 7" black stove pipe tee #104149, 8" black stove pipe tee #104148. 

This 4 inch pre-painted black stove pipe elbow is used to connect two lengths of flue pipe together.

Also available: 5" black stove pipe elbow #104167, 6" black stove pipe elbow #109323, 7" black stove pipe elbow #104170, 8" black stove pipe elbow #104171.

Use when installing or replacing a water heater, for residential and commercial use with heating and air conditioning ductwork, furnace piping and venting, and exhaust fans.

Also available: 4" elbow #104177, 5" elbow #104178, 6" elbow #108512, 7" elbow #104180, 8" elbow #104181.

• Used as a connector between the stove and chimney system or existing masonry chimney
• Manufactured from 24-gauge black matte pre-painted scratch and chip-resistant steel
• Requires a minimum of 18-in clearance from combustible materials

Also available: 6" pipe #104235, 8" #104181

Rigid duct is perfect for a variety of venting and air handling applications. The smooth walled duct is easy to clean and provides better air flow and reduced lint build-up when used for dryer venting. Simply roll the duct and connect the snap lock tongue and groove seam to form a secure joint prior to installing.

Also available: 6" pipe #104241, 7" pipe #104242, 8" pipe #104243.

Used to connect woodstove to entrance of chimney.

Quality, matte black 8" x 12" snap-lock stove pipe for your basic stove pipe needs. 

Furnaces and pipes need a proper ventilation system in order to be effective, and even the best fireplaces are useless without a functioning ventilation system. This slip joint can connect your 6 or 8 inch pipes and complete your ventilation system. The heavy gauge steel ensures that this product is built to withstand the wear and tear and maintain a secure connection.

Use on stoves with oval flue collars to adapt to round pipe. It is an excellent choice because it improves stove performance by maintaining high flue gas temperatures for a strong, steady draft.

This quality, galvanized pipe tee is used as a 90 degree branch for venting applications, including heating and air conditioning.

Use to cap off the end of round stove pipe that is crimped. Also available: 3 inch #104185, 6 inch #108946, 7 inch #104187.

This sturdy, galvanized stove pipe tee plug features crimping on the end for inserting into the un-used section of tee pipe you wish to close off. Also available: 3" plug #104188, 4" plug #104189, 7" plug #104194.

Black snap-lock tee cover with large end is used with the tee stove pipe to allow for easy cleaning of your pipe. Also available: 6 inch #108939 and 8 inch #104201.

This sturdy, black matte end cap with crimp end allows for easy clean-out of your stove pipe. Also Available in size 7" #104204 and size 8" #104206.

Connects stovepipe or accessory together when non-crimped ends meet, Both ends are crimped. Features a more scratch-resistant paint. Pipe smokes less at start-up due to higher-temperature-rated paint finish.

Also available: Size 8" x 8" #108933.

• Outside mounting design provides maximum free air space which helps to ensure optimal draft
   
• Attractive black powder coat finish helps protect against the elements
   
• Quick and easy installation requires only a screwdriver
   
• Helps protect internal metal fireplace fixtures and masonry chimney from deterioration
   
• Keeps out rain, birds, animals and debris
   
• Arrests sparks and reduces certain downdrafts